5SHY3545L0010 redundant processor module is the core component of ABB AC800M series controller, designed for industrial automation scenarios, and achieves high availability control through dual hot standby architecture.
Core technical features
Dual hot standby architecture
Synchronous redundancy mechanism: The master and slave processors synchronize data in real time through optical fiber or copper cable to ensure zero data loss during fault switching.
Automatic fault detection: Built-in self-test program, continuous monitoring of CPU, memory and communication interface status, fault response time <10ms.
Non-disturbance switching: When the master processor fails, the slave processor seamlessly takes over control, and the system downtime is <50ms, meeting the IEC 61508 SIL3 safety level.
Hardware configuration
Processor performance: PowerPC architecture, main frequency 533MHz, support floating-point operations, meet the needs of complex control algorithms.
Memory and storage: Standard 256MB RAM, support SD card expansion to 2GB, store programs, configurations and historical data.
Communication interface: integrated with 2 RJ45 Ethernet ports (10/100Mbps), 2 RS232 serial ports and 1 USB 2.0 interface, compatible with Modbus TCP/IP, OPC UA and other protocols.
Environmental adaptability
Wide temperature operating range: supports -20℃ to 70℃ ambient temperature, suitable for extreme scenarios such as steel mills and oil fields.
Anti-seismic design: complies with IEC 60068-2-6 standard, stable operation at vibration frequency of 10-500Hz.
Protection level: IP20 protection, suitable for indoor control cabinet installation.
Functional advantages
High reliability control
Dual channel redundancy: I/O modules, power supply and communication bus all support redundant configuration, and single point failure does not affect system operation.
Hot-swap support: processor module supports online replacement, no need to shut down for maintenance, improving system availability.
Flexible expansion capability
Modular design: supports expansion to 64 I/O modules, covering analog, digital and dedicated communication modules (such as PROFIBUS-DP).
Distributed architecture: multiple remote I/O stations can be connected through the Control Network (CN) bus, with a maximum transmission distance of 10km.
Development friendliness
Programming environment: compatible with Control Builder F software, supports IEC 61131-3 standards (LD/FBD/ST/SFC).
Simulation debugging: built-in simulator, supports offline program testing, shortens the development cycle.
Diagnostic tool: processor load, memory usage and communication status can be monitored in real time through the System 800xA engineering station.
Typical application scenarios
Process control
Petrochemical: interlocking control of reactor temperature and pressure in refinery units to ensure safe production.
Electric energy: gas turbine speed and steam parameter adjustment to improve power generation efficiency.
Discrete manufacturing
Automobile manufacturing: welding robot path planning, synchronous control of painting line speed.
Packaging machinery: closed-loop control of film tension and sealing temperature to ensure product quality.
Infrastructure
Water treatment: pump station liquid level and pipe network pressure regulation to achieve energy-saving operation.
Railway transportation: signal system interlocking control to ensure safe train spacing.
Model selection
5SHY3545L0010: basic redundant type, suitable for conventional control needs.
3BSE010535R2: enhanced type, supports more I/O channels and third-party protocols.
3BSE010535R3: high-performance type, equipped with a higher-speed processor, suitable for complex algorithm scenarios.
Supporting components
Power module: PM866 (redundant configuration, 24V DC power supply).
I/O module: TB807 (digital input), TB808 (digital output), TB840 (analog input).
Communication module: CI854 (PROFIBUS-DP), CI867 (Modbus TCP).
Installation precautions
Grounding specification: The module housing needs to be grounded separately, and the grounding resistance is <1Ω.
Wiring requirements: The control bus and power line are routed separately, with a spacing of >20cm.
Heat dissipation design: Ensure good ventilation in the control cabinet, and the module spacing is ≥50mm.
Conclusion
The 5SHY3545L0010 redundant processor module has become a core component of the control system in the field of industrial automation with its dual-machine hot standby architecture, high reliability design and flexible expansion capabilities.
Related product recommendations:
3BHB007211R116
GVC714A101 3BHE024415R0101
XVC768116 3BHB007211R116
3BHE004573R0145
3BSE018135R1
38HB007209R0105
500BIO01
CI858K01
3BHB020538R0001
UFC760BE145 3BHE004573R0145
3BHE024415R0101
XVC767AE105 38HB007209R0105
KVC758A124 3BHE021951R0124
GVC714A101 3BHB020538R0001
1MRB150005R0001
1MRB200060/E
1MRB150024R0002
500BIO01 1MRB150005R0001 1MRB200060/E
500BIO01 1MRB200060/E
500BIO01 1MRB150005R0001
More…
There are no reviews yet.